When the driver has finish installing then shut down MarsBoard and connect the MarsBoard to your computer and let the board go to recovery mode, then your computer will detect the board and you will see it within device manager. Then click “Install Driver”, and depending on your version of Windows the Security below may show up twice during installation.
#Lg burning tool download install
If you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first.
Then double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility. There’s no need to connect your Rockchip device during this procedure just download and extract RKDriverAssistant.zip If you have already installed the USB driver please skip this step. install using RKDriverAssistant tools - the easy way.There two ways to install the driver under Windows: Both RKBatchTool and RKDevelopTool rely on the RK USB driver so you will need to install it first as below: To flash the update.img, you need to use the RKBatchTool and to flash the partitions, you will need to use RKDevelopTool. The Windows tool for flashing the image is provided by Rockchip. a micro USB cable with one side plugged in to the OTG port of MarsBoard and the other side plugged into the USB port on PC.a PC running Windows (XP 32/64bit, Windows 7 32/64 bit) or Linux (32/64bit).What you will need to flash the board is: You can always flash the MarsBoard, it never bricks (as the name :)) unless some hardware damage occurs. 3.4 Flash RKBatchTool Firmware File with RkFlashKit.3.1 Using Linux Upgrade Tool to flash update.img.2.2.2 Using AndroidTool to falsh image by partition.2.2.1 Using AndroidTool to flash update.img (Firmware).2.1.1 Install using RK Driver Assistant tools.
0 kommentar(er)
